Service lines
Services
Construction Materials Testing
Field and laboratory testing of concrete, soil, and aggregate to ASTM standards — run by ACI- and NICET-certified technicians, with results reviewed and issued under a documented quality system. Sugar Land, Texas laboratory; Houston-metro dispatch; project-based coverage nationwide through 27 regional hubs.
Geotechnical Engineering
Subsurface investigations, laboratory soils testing, and geotechnical reporting to characterize site conditions before design and verify them during construction.
Forensic Engineering
Failure investigation on distressed concrete, foundations, and pavements: coring, sampling, laboratory analysis, and licensed engineers for opinion and testimony.
Environmental Services
Environmental site assessments and construction-phase environmental support that keep transactions and projects moving without surprises.
Land Surveying
Boundary, topographic, and construction staking surveys that put the design on the ground accurately the first time.
Deep foundations · pile inspection and testing
Deep Foundation Inspection & Pile Testing
Driven piles, drilled shafts, auger cast piles, helical piles, and micropiles are buried the day they are built. We put an inspector at the rig for every element the specification calls for, run the load and integrity tests that prove capacity, and hand the engineer of record a pile record package they can accept.
Pile Installation Monitoring
Driven, helical and micropile installation monitoring: hammer checks, blow counts, tip elevations, splices, driving criteria. IBC 1705.7 special inspection.
Drilled Shaft & Auger Cast Pile Inspection
Drilled shaft, drilled pier and auger cast pile inspection: depth, bearing stratum, bottom cleanliness, slurry, cage, grout volume, concrete placement. IBC 1705.8.
Pile QA/QC Programs
Pile QA/QC for owners and contractors: inspection and test plans, material verification, hold points, nonconformance control, final pile record packages.
Static Pile Load Testing
Static pile load test monitoring and reporting: axial compression (ASTM D1143), tension (D3689), lateral (D3966), bi-directional (D8169). Houston and nationwide.
Dynamic Pile Testing (PDA)
High-strain dynamic pile testing (ASTM D4945) during driving and restrike: capacity, driving stresses, hammer performance, pile integrity. Signal matching available.
Pile Integrity Testing (PIT, CSL, TIP)
Pile and drilled shaft integrity testing: low-strain PIT (ASTM D5882), crosshole sonic logging (D6760), thermal integrity profiling (D7949). Houston, nationwide.
Handheld 3D scanning · Artec Leo
3D Scanning Services
Sub-millimeter handheld 3D scanning on your jobsite, in your plant, or in your fabrication shop. We scan rebar before the pour, failed members before demolition, corroded steel, worn parts, fabricated assemblies, and modular builds — and deliver meshes, point clouds, CAD, and measurement reports you can act on.
Pre-Pour Rebar & Embed Scanning
Scan rebar, embeds and anchor bolts before the pour. Permanent 3D as-built record checked against structural drawings. Houston and nationwide.
Forensic & Claims Scanning
3D scans of cracks, spalls, settlement and failed members for insurance claims and litigation. Measured, time-stamped record. Houston and nationwide.
Corrosion & Pitting Mapping
3D scan corrosion mapping of pipe, tanks and vessels: pit depth, external wall loss and coating damage as API 579 and B31G-ready reports. Houston-based.
Reverse Engineering & Scan-to-CAD
Scan worn or obsolete parts and get STEP, IGES or SolidWorks CAD back fast. Impellers, castings, brackets, molds. On-site in Houston plants or ship-in.
Fabrication Fit-Up & Dimensional Inspection
Scan-to-CAD dimensional inspection for structural steel, pipe spools, precast and skids. Deviation color maps and FAI reports before you ship. Houston TX.
Digital Twins & VR Training Assets
Scan machines, gauges and tools into optimized textured 3D models for Unity, Unreal, VR training and AR work instructions. On-site capture.
Modular, Container & Skid As-Builts
As-built 3D scanning for modular units, container buildings and skids. We capture fab-shop field changes and deliver DWG, Revit, STEP or E57 files.
Contract Handheld Scanning (Day Rate)
On-site handheld 3D scanning (Artec Leo) by the day or hour for engineering firms, surveyors and laser-scanning companies. 27 US hubs.
FAQ
Choosing the right service
Which service do I need: materials testing, special inspection, or geotechnical?
Geotechnical comes first — borings and a report that tell the engineer what the ground can carry. Materials testing happens during construction, verifying the concrete, soil, and aggregate placed match the specification. Special inspection is the code-required verification under IBC Chapter 17 that the structural work (reinforcing, formwork, bolting, welding, masonry) matches the approved plans. Most commercial projects need all three, usually from one agency.
Can one firm handle testing, inspection, environmental, and survey on the same project?
Yes. Materials testing and special inspection are performed by our own certified technicians. Geotechnical, forensic, environmental, and survey work is delivered with professionals licensed in the project's state, coordinated under one proposal and one point of contact.
How do I get pricing?
Send the specification sections for quality requirements, concrete, and earthwork, plus the plans or quantities, through the proposal request form. A written scope with unit rates and a total comes back — rate sheets alone are not a budget.
Do you work outside the Houston area?
Yes. Sugar Land, Texas is the laboratory and headquarters; field work is dispatched through 27 regional hubs with project-based coverage in all 50 states. Same-day scheduling is typical in the Houston metro; elsewhere, work is scheduled by phone at (346) 420-5425 or through a proposal.
What is IBC Chapter 17 special inspection and who provides it?
IBC Section 1705 requires an approved agency to verify structural concrete, reinforcing, soils and compacted fill, structural masonry, structural steel bolting and welding, and post-installed anchors against the approved drawings, and to report to the building official. The owner hires the agency; we supply ICC-certified special inspectors and ACI- and NICET-certified technicians with the laboratory behind them.
What does a materials testing report include?
Field data as recorded — slump, air content, temperature, cylinder IDs, nuclear gauge density and moisture with the Proctor reference — plus laboratory results (ASTM C39 compressive strength, ASTM D698 or D1557 Proctor curves, ASTM C136 gradations, ASTM D4318 Atterberg limits) with pass/fail against the specification. Reports are reviewed under the quality system before distribution to the contractor, engineer of record, and building official.
Scheduling & proposals
Ready to schedule testing?
Call to schedule a technician, or send project documents for a written proposal.